Custom-tailored hole transport layer using oxalic acid for high-quality tin-lead perovskites and efficient all-perovskite tandems.

All-perovskite tandem solar cells (TSCs) have exhibited higher efficiencies than single-junction perovskite solar cells (PSCs) but still suffer from the unsatisfactory performance of low-bandgap (LBG) tin-lead (Sn-Pb) subcells. The inherent properties of PEDOT:PSS are crucial to high-performance Sn-Pb perovskite films and devices; however, the underlying mechanism has not been fully explored and revealed. Here, we report a facile oxalic acid treatment of PEDOT:PSS (OA-PEDOT:PSS) to precisely regulate its work function and surface morphology. OA-PEDOT:PSS shows a larger work function and an ordered reorientation and fiber-shaped film morphology with efficient hole transport pathways, leading to the formation of more ideal hole-selective contact with Sn-Pb perovskite for suppressing interfacial nonradiative recombination losses. Moreover, OA-PEDOT:PSS induces (100) preferred orientation growth of perovskite for higher-quality Sn-Pb films. Last, the OA-PEDOT:PSS-tailored LBG PSC yields an impressive efficiency of up to 22.56% (certified 21.88%), enabling 27.81% efficient all-perovskite TSC with enhanced operational stability.

Improving interface quality for 1-cm2 all-perovskite tandem solar cells.

All-perovskite tandem solar cells provide high power conversion efficiency at a low cost1-4. Rapid efficiency improvement in small-area (<0.1 cm2) tandem solar cells has been primarily driven by advances in low-bandgap (approximately 1.25 eV) perovskite bottom subcells5-7. However, unsolved issues remain for wide-bandgap (> 1.75 eV) perovskite top subcells8, which at present have large voltage and fill factor losses, particularly for large-area (>1 cm2) tandem solar cells. Here we develop a self-assembled monolayer of (4-(7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid as a hole-selective layer for wide-bandgap perovskite solar cells, which facilitates subsequent growth of high-quality wide-bandgap perovskite over a large area with suppressed interfacial non-radiative recombination, enabling efficient hole extraction. By integrating (4-(7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid in devices, we demonstrate a high open-circuit voltage (VOC) of 1.31 V in a 1.77-eV perovskite solar cell, corresponding to a very low VOC deficit of 0.46 V (with respect to the bandgap). With these wide-bandgap perovskite subcells, we report 27.0% (26.4% certified stabilized) monolithic all-perovskite tandem solar cells with an aperture area of 1.044 cm2. The certified tandem cell shows an outstanding combination of a high VOC of 2.12 V and a fill factor of 82.6%. Our demonstration of the large-area tandem solar cells with high certified efficiency is a key step towards scaling up all-perovskite tandem photovoltaic technology.

Improved Carrier Management via a Multifunctional Modifier for High-Quality Low-Bandgap Sn-Pb Perovskites and Efficient All-Perovskite Tandem Solar Cells.

All-perovskite tandem solar cells (TSCs) hold great promise in terms of ultrahigh efficiency, low manufacturing cost, and flexibility, stepping forward to the next-generation photovoltaics. However, their further development is hampered by the relatively low performance of low-bandgap (LBG) tin (Sn)-lead (Pb) perovskite solar cells (PSCs). Improving the carrier management, including suppressing trap-assisted non-radiative recombination and promoting carrier transfer, is of great significance to enhance the performance of Sn-Pb PSCs. Herein, a carrier management strategy is reported for using cysteine hydrochloride (CysHCl) simultaneously as a bulky passivator and a surface anchoring agent for Sn-Pb perovskite. CysHCl processing effectively reduces trap density and suppresses non-radiative recombination, enabling the growth of high-quality Sn-Pb perovskite with greatly improved carrier diffusion length of >8 µm. Furthermore, the electron transfer at the perovskite/C60 interface is accelerated due to the formation of surface dipoles and favorable energy band bending. As a result, these advances enable the demonstration of champion efficiency of 22.15% for CysHCl-processed LBG Sn-Pb PSCs with remarkable enhancement in both open-circuit voltage and fill factor. When paired with a wide-bandgap (WBG) perovskite subcell, a certified 25.7%-efficient all-perovskite monolithic tandem device is further demonstrated.

Pure 2D Perovskite Formation by Interfacial Engineering Yields a High Open-Circuit Voltage beyond 1.28 V for 1.77-eV Wide-Bandgap Perovskite Solar Cells.

Surface post-treatment using ammonium halides effectively reduces large open-circuit voltage (VOC ) losses in bromine-rich wide-bandgap (WBG) perovskite solar cells (PSCs). However, the underlying mechanism still remains unclear and the device efficiency lags largely behind. Here, a facile strategy of precisely tailoring the phase purity of 2D perovskites on top of 3D WBG perovskite and realizing high device efficiency is reported. The transient absorption spectra, cross-sectional confocal photoluminescence mapping, and cross-sectional Kelvin probe force microscopy are combined to demonstrate optimal defect passivation effect and surface electric-field of pure n = 1 2D perovskites formed atop 3D WBG perovskites via low-temperature annealing. As a result, the inverted champion device with 1.77-eV perovskite absorber achieves a high VOC of 1.284 V and a power conversion efficiency (PCE) of 17.72%, delivering the smallest VOC deficit of 0.486 V among WBG PSCs with a bandgap higher than 1.75 eV. This enables one to achieve a four-terminal all-perovskite tandem solar cell with a PCE exceeding 25% by combining with a 1.25-eV low-bandgap PSC.